Technical Guide
Rustic Cedar Timber Oil
Oil-based wood stain for deep protection and rustic finish.
Photo Gallery
pH Level
N/A
Type
Penetrating Oil-Based Wood Stain & Sealer (Low VOC)
Technical Data Sheet
SDS Sheet
Usage Instructions
Product Overview
EXPERT Log & Timber Oil – Rustic Cedar is an ultra-premium penetrating oil-based wood stain and sealer for exterior wood structures like log homes, cabins, and decks. It conditions and protects from within, allowing the wood to breathe naturally.
Directions For Use
- Preparation: Ensure wood is clean, dry, and free of previous coatings. Moisture content should be below 13%.
- Application:
- Stir thoroughly before and during use.
- Apply liberally using a brush, pad, or sprayer.
- Flood the surface and allow it to absorb.
- Back-brush to ensure even penetration.
- Wipe away excess after 30 minutes on horizontal surfaces.
- Dry Time: Allow 24 hours before light foot traffic, with full cure in 3-5 days.
Maintenance
- Reapply every 3-5 years on vertical surfaces and 1-2 years on high-exposure horizontal surfaces.
Safety Notes
- Wear appropriate PPE.
- Ensure adequate ventilation during application.
Storage
- Store in a cool, dry place, avoiding direct sunlight.