
Technical Guide
NuTopp Roof Care
NuTopp: Roof Rejuvenator & Sealer
Photo Gallery







pH Level
7 to 8 at 5% in distilled water
Technical Data Sheet & Applicator Specifications
Usage Instructions
Product Overview
- NuTopp is a bio-based asphalt surface rejuvenator formulated with plant oils, surfactants, and polyethylene polyamines.
- It is designed for professional application on asphalt shingle roofs to restore oils lost through aging and promote granule adhesion.
Directions For Use
-
Inspect:
- Confirm the roof type and structural soundness.
- Document the roof's age, condition, granule loss, and any damage.
- Repair any loose, lifted, or damaged shingles before application.
-
Clean:
- Remove debris, correct drainage obstructions, and clean dirt or organic growth using approved methods.
- Protect non-target surfaces and areas from overspray and runoff.
-
Dilution:
- Use a 3:1 water-to-NuTopp concentrate mix.
- Examples: 1 gal concentrate + 3 gal water = 4 gal solution.
-
Application:
- Use controlled low-pressure equipment (100-300 PSI) to apply the solution evenly.
- Avoid pooling, runoff, and overspray during application.
-
Control:
- Maintain consistent pressure and spray pattern.
-
Document:
- Record the roof area, amount of concentrate used, and conditions.
Safety Notes
- Wear eye protection and full skin coverage.
- Use respiratory protection if ventilation is inadequate.
- Store the product in a cool, ventilated place, away from sunlight and rain.
