Technical Guide
Grease Slayer
(PH >= 13) • Caustic - Sodium Hydroxide • Surface & Structural Grease • Compare to EaCo Chem's Cleansol BC
Photo Gallery
pH Level
>= 13
Type
Caustic + Alkaline Degreaser & Neutralizer
Product Label
SDS Sheet
Usage Instructions
Product Overview
Grease Slayer isn’t your average degreaser...it’s the chemical equivalent of a flamethrower for grime. It eats through grease, oil, carbon, oxidation, and filth on surfaces such as concrete, brick, EIFS, vinyl siding, stone, fiberglass, and awnings.
Directions For Use
- Do not mix with bleach.
- Don’t let it dry on hot surfaces.
- Test a small area first.
- Use 1,000 PSI minimum if spraying.
- Double-tap your application for full soil release.
- Dial in your metering valve or proportioner, coat the surface bottom-up, then rinse top-down.
Dilution
- Heavy Oil / Carbon / Stained Wood: 1:1 to 1:2
- Medium Soil / Everyday Filth: 1:3 to 1:10
- Light Cleaning / Routine Washes: 1:11 to 1:20
Covers 100–250 sq. ft. per gallon, based on the surface condition.
Application
Apply hot or cold, through a pressure washer, sprayer, or brush.
Safety Notes
- Use eye, face, & rubber glove protection when handling.
- Do not store above 120ºF or allow to freeze.
- Causes severe skin burns & eye damage. Handle with care.