Technical Guide
Clear Transparent Stain
Professional clear penetrating oil sealer that protects fences, decks, siding, and exterior wood while allowing the wood to weather naturally. Deep penetration helps repel water without forming a surface film.
Photo Gallery
pH Level
N/A
Type
Penetrating Oil-Based Wood Stain & Sealer (Low VOC)
Technical Data Sheet
SDS Sheet
Usage Instructions
Product Overview
EXPERT Stain & Seal Clear Transparent is a professional-grade penetrating oil wood sealer designed to protect exterior wood structures while allowing them to naturally weather and gray over time.
Directions For Use
-
Surface Preparation
- Ensure wood is clean, dry, and free of previous coatings, dirt, and mill glaze.
- Moisture content must be below 13% before application.
- Use EXPERT Clean & Bright Step 1 & Step 2, followed by a thorough rinse. Let dry completely.
-
Application
- Stir thoroughly before and during application.
- Apply generously using a brush, stain pad, or low-pressure airless sprayer.
- Flood the surface to allow maximum absorption. Back-brush to ensure even penetration.
- Wipe away any unabsorbed stain after 30 minutes to prevent glossy spots.
- Allow 24 hours with no foot traffic; full cure in 3–5 days.
Safety Notes
- Wear appropriate PPE: gloves, long sleeves, and safety glasses.
- Ensure adequate ventilation.
- Do not apply to surfaces in direct contact with food.
- Avoid contact with eyes and prolonged skin exposure.